Deactivating & Reactivating Employers (Subcontractors)

Deactivating / Removing an Employer (subcontractor) from a project

1. Go to the project in question
2. Select Employers > Active
3. Select the employer you wish to deactivate
4. Go to Options > Deactivate
   NOTE: A new window will now, appear giving you some warnings.
   This is to remind you the employer will be deactivated, not deleted
5. Confirm deactivation

Reactivating an Employer on a project

1. Select a project from the Company Overview drop-down on the top right
2. Select Employers > Active
3. Select Filter on the top right, then filter for Deactivated status
4. Select the Employer you want to reactivate on the project
5. Select Options > Activate
6. Confirm your selection
   NOTE: any workers that were approved under the Employer in question before deactivation will be re-activated alongside the Employer

Deactivating an Employer permanently

NOTE: this action cannot be undone

If you would like to remove an Employer from the system permanently, you can permanently delete their profile. This cannot be reversed, and the Employer will no longer be available to import onto projects, reactivate, or perform any other actions going forward.

NOTE: You can only delete an employer after they have been removed from all projects they are active on

1. From Company Overview, go to Employers > Active
2. Select the Employer you would like to deactivate
3. Select Options > Deactivate 
4. Select Delete