How do I modify the check list or picture of an existing piece of equipment?
Updated
Log into HammerTech (if you are not already logged in), then navigate using the left hand menu and select > Administration > Equipment Types
Once you are on the 'Equipment Types' page > Select the piece of Equipment you wish to modify the check list of.
The system will navigate you to the Equipment profile page titled 'Equipment Type / Edit'
The field you want to navigate to is titled 'Checklist Items', each line represents an item i.e. 'type pressure' on line 1 and then 'mud and dirt free' on line 2, would create 2 items to check when inducting a piece of Equipment on site / premises.
Enter the check list items you wish to be utilised during the induction phase, note - all check list items can be marked as 'yes', 'N/A' and 'No'
Note: For existing Equipment, a picture may have already been assigned as a part of our standard content. However this can be replaced.
To update or add a picture against a piece of equipment select > 'Select Image'> browse your computer or mobile device file system > select the desired image.
Once you have finished updating the check list and/or picture associated to a piece of Equipment, scroll to the bottom of the page and select > 'Save Changes'